Product Information

　　HAWKER

　　VARTA TP Nickel Cadmium batteries are used in power supply systemswhere the load duration is between 1 and 10 hours. They are suitable forbattery operation mode (charger disconnected during discharge), responsemode (battery switched into circuit at power failure) and standby mode(battery permanently connected to the charging source and load). Theyare robust and resistant to deep discharge and mechanical stress. Mainareas of application are power stations, substations, UPS and industrialsystems, traffic control and emergency power supply systems.

　　VARTA

　　TP BATTERY

　　TP 10 ...TP 380

　　Construction

　　Positive Electrode

　　Pocket plate

　　Negative Electrode

　　Pocket plate

　　Separation

　　Features

　　Single cells, 1.2 V nominal voltage

　　High power performance during

　　discharge

　　High energy output at low temperature

　　Perforated separator

　　Casing Material

　　Polystyrene, impact resistant

　　Electrolyte

　　Potassium hydroxide d = 1.19 kg/l

　　Terminal DesignSolid nickel-plated steel posts, bolted

　　connection

　　Pole Screw

　　Metric threaded, nickel-plated steel screw

　　Connectors

　　Solid nickel-plated copper connector

　　Vent Plugs

　　Gas drying vent plug

　　ChargingFloat charge voltage: 1.40 V/cBoost charge voltage: 1.55 - 1.65 V/cRecommended Range of Operation-20°C to +45°C (preferred value 20°C)

　　Product Standard

　　DIN 40771

　　TP cells correspond with KPM-P type cells

　　according to EN 60623 resp. IEC 60623

　　TP 10

　　TP 18

　　TP 24

　　TP 30

　　TP 40

　　TP 55

　　TP 65

　　TP 75

　　TP 90

　　TP 110

　　TP 125

　　TP 140

　　TP 165

　　TP 185

　　TP 200

　　TP 230

　　TP 275

　　TP 315

　　TP 380

　　Installationon racks or in cabinets.

　　VARTA TP cells are suitable for installation

　　The batteries can be assembled in crates

　　for mobile use or for special applications.

　　For use in earthquake zones special racks

　　are available.The cells must be operated in accordancewith the safety requirements stated in EN50272-2.